2-Stroke 52cc Post Hole Digger, 1700W 2.3HP Petrol Earth Auger Post Hole Digger Borer with 4/6/8" Drill Bit and Extension Rods Fence Ground Drill for Fence, Farmland and Garden

DescriptionThe traditional way of digging a hole with a hoe is time-consuming, labor-intensive, and prone to backache at the end of the process. Advancement in technology has brought about labor-saving and professional digging equipment that is ready to liberate you from the hassle of manual digging. Equipped with a powerful fuel engine, this auger post hole digger digs more efficiently than manual trenching, saving valuable time and making digging a pleasure.Starting Method1. Turn on the switch.2. Before each start, press the oil bubble to suction oil into the oil pipe.3. When the cold machine starts, close the damper switch first.4. When ignition is heard, pull the start handle 5-8 times.5. Open the damper switch.Drill Installation Steps1. Connect the drive shaft.2. Insert the bolt.3. Put the pin to lock it.SpecificationMaterial: PP, Steel, Rubber, Aluminum, Iron, Carbon SteelColor: Orange, BlackEngine Type: Single Cylinder, 2-stroke, Air-cooledDisplacement: 52ccMixed Fuel: Gasoline:Two-stroke Oil (25:1)Ignition System: C.D.I.Power: About 1.7kwHorsepower: 2.3hpFuel Tank Capacity: 1.2L/0.3galSpeed: 6500-8500r/minNo-load Speed: 2800-3200r/minFuel Consumption: 610g/kw·hDrill Diameter: 10cm/3.9inch, 15cm/5.9inch, 20cm/7.9inchDrill Length: 75cm/30inchShaft Size: 2*5cm/0.8*2inchEngine Size: 22.5*22*15cm/8.9*8.7*6inchDigger Whole Size: 50*23cm/20*9inchExtension Bar Length: 30cm/11.8inchDigger Package Size: 35*28.5*29cm/13.8*11.2*11.4inchDrill Package Size: 80.5*22*33cm/31.7*8.7*13inchDigger Gross Weight: 9kg/20lbsDigger Net Weight: 8.1kg/18lbsDrill Gross Weight: 9.5kg/21 lbsDrill Net Weight: 7.35kg/16.2lbsPackage Included1 x Auger Post Hole Digger1 x Extension Bar3 x Drills1 x Fuel Oil Mixing Bottle1 x Funnel1 x Spare Starter1 Pair x Goggles1 x English ManualTool Kit for AssemblyNotes1. The tank should be filled with a mixture of oil (gasoline: two-stroke oil = 25: 1). The post digger should be used with two-stroke oil rather than four-stroke oil, otherwise accidents will occur. All oils are excluded.2. Please start the gas auger by pulling the starter quickly without stopping in the middle. 3. Press the oil bubble a few more times before starting. If there is oil coming in and out of the fuel line, which means oil has been supplied.4. Do not use on steep slopes exceeding 15°. 5. Please do not drill ice, frozen soil, sandy clay, and sand and gravel mixed soil, or the drill bit will bend easily.6. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• 【Great Power】With its two-stroke fuel engine, this post hole digger has a powerful horsepower (about 1.7kw/2.3hp), which makes it easier and more efficient to dig holes to save more valuable time and make digging an enjoyable experience.
• 【Ergonomic Design】The ergonomic double handles are wrapped in rubberized covers for a stable and comfortable grip and are also suitable for two-person control that is less effort intensive than single control.
• 【Good Heat Dissipation】The heat dissipation holes on the engine can effectively dissipate heat to ensure stable operation, reduce noise, and prolong the service life of the machine. A smoothly rotating iron shaft and enlarged deepened cylinder make it more stable and less noisy when digging holes for a better user experience.
• 【Easy to Control】The on/off button and smooth manual starter make it simple to use, so even novices can master it quickly. The digging speed can be adjusted at will by adjusting the force of pressing the throttle switch on the grip to suit different soil conditions.
• 【Low Fuel Consumption】The high-quality carburetor fully burns the fuel so that the energy can be fully converted and fuel consumption is only 610g/kw·h, saving you money on fuel.